Medical air mattress with pump / Anti -bedsore / Anti- decubitus
2.5”,5” ,8” cell
Our medical anti-decubitus mattress made of taiwan Nanya / Dingzing(PVC/ TPU), One-time moulding for bubble type mattress. Offer a variety of woundcare solutions for the treatment and healing of pressure ulcers. Give mattress warranty 12 months and compressor 18 months. Top quality aluminum compressor provide very silent and durable, big air output advantage.
New model with toilet hole for more practical use for disabilities.
CPR, strength/ PU cover, static pillow, laser holes, toilet hole replacement cell and repair kit are optional.
Silent pump 18 months warranty
Specification
Pump | Pad |
Item:HF608 | Item: HF6005 |
Power supply: 110V/220V/50-60Hz | Size:200cm(L) x 90cm(W) x 7.0cm(H) |
Air output: 5-7liter/min. | 18 cells |
Pressure range: 50mmHg - 110 mmHg | end flaps,repair kit ,hose 1.5M |
Cycle time: 12 min. | Material: medical class Taiwan Nanya TPU |
Power consumption: 7 W | PVC thickness: 0.3 mm |
Fuse: 1A | Color :blue |
Size: 23.5(L) x 12(W) x9.5 (H)cm | Mattress weight : 2.2-2.5kg |
Weight: 1.4 kg | Weight Capacity: 135-145kg |
About our mattress
1. When preparing to inflate, the mattress should be flattened. After the mattress is filled with air, it can be used normally. Generally, the first inflating time is about 30 minutes.
2. When inflating, firstly check whether the pressure of the air pump is adjusted to the maximum,whether the extended rubber tube of the mattress is cut with a pair of scissors, it is convenient to match the air pump outlet.
3. Check that the air pipe joints under the mattress are all connected and kept inflated.
4. Because the winter is cool, we can put a thin layer of tweezers on the mattress to keep the patient warm and make the patient more comfortable.
5. Patients over 135KG cannot use this mattress.
6. Pay attention to the pressure control when inflating, and do not exceed the maximum pressure to prevent the airbag from breaking through the pressure.
7. Pay attention to keep the mattress clean and hygienic, often wash the surface with a neutral detergent, pay attention to acid and alkali.
8. Note that there should be no sharp objects on the mattress and the surface of the sheet to prevent the mattress from being pierced.
9. Be careful to keep it clean when using it. Store it in a dry and ventilated place when handling. Pay attention to moisture.
Pillow function
The cell of the heag positon won't be alternating , to provide the most comfortable for the patient
Alternating mode
The pump will be inflate and deflate for the cell with cylicity , to change the control position beteween the patient and the bed ,so that to promote the blood circulation to prevent the bedsore and recovery the bedsore, reduce the patient's pain and the nursing labor intensity.
Static mode
The system can be switched to a static mode with constant low pressure, to facilitate all kinds of nursing procedures including dressing changes.
Modular air cells , easy to change and clean.
Medical grade TPU material, environmentally friendly, waterproof, anti-bacterial,etc
Air ventilation hole design, bolwing by tiny holes, moisture control ,patient can feel more comfortable
High density sealed foam base provide more security, and can be vaccum save freight cost
Buckle fasten to bed more stable
Zipper all around cover easy maintenance and cleaning
Static mode
Factory info
Foshan hongfeng co.,Ltd(FOFO medical co., ltd) is located in Foshan city, Guangdong province. Our company specializes in the production of 5 inch bubble mattress, 5inch tubular mattress, mattress replacement with foam base, ICU 8inch cell in cell mattress,compressor nebulizer, pressure let air massager, suction machine and wheelchair with advanced technology. Our company covers an area of 10,000 square meters. "Intervention Protective Gloves" fill the domestic blank. Our company got ISO13485 medical instrument quality certification in 2001. Double Eagle brand products are sold in Beijing, Shanghai, Guangzhou, Jiangsu, and Shandong. Main products: one-off medical plastic instrument, mutilated machine, vertebrae tractor, medical bed style air cushion, medical oxygen bag, medical air cushion, and food tractor. Our medical instrument is sold all over the country. We sincerely welcome friends at home and abroad to make contribution to the development of Chinese medical instrument.
Medical air mattress with pump / Anti -bedsore / Anti- decubitus
2.5”,5” ,8” cell
Our medical anti-decubitus mattress made of taiwan Nanya / Dingzing(PVC/ TPU), One-time moulding for bubble type mattress. Offer a variety of woundcare solutions for the treatment and healing of pressure ulcers. Give mattress warranty 12 months and compressor 18 months. Top quality aluminum compressor provide very silent and durable, big air output advantage.
New model with toilet hole for more practical use for disabilities.
CPR, strength/ PU cover, static pillow, laser holes, toilet hole replacement cell and repair kit are optional.
Silent pump 18 months warranty
Specification
Pump | Pad |
Item:HF608 | Item: HF6005 |
Power supply: 110V/220V/50-60Hz | Size:200cm(L) x 90cm(W) x 7.0cm(H) |
Air output: 5-7liter/min. | 18 cells |
Pressure range: 50mmHg - 110 mmHg | end flaps,repair kit ,hose 1.5M |
Cycle time: 12 min. | Material: medical class Taiwan Nanya TPU |
Power consumption: 7 W | PVC thickness: 0.3 mm |
Fuse: 1A | Color :blue |
Size: 23.5(L) x 12(W) x9.5 (H)cm | Mattress weight : 2.2-2.5kg |
Weight: 1.4 kg | Weight Capacity: 135-145kg |
About our mattress
1. When preparing to inflate, the mattress should be flattened. After the mattress is filled with air, it can be used normally. Generally, the first inflating time is about 30 minutes.
2. When inflating, firstly check whether the pressure of the air pump is adjusted to the maximum,whether the extended rubber tube of the mattress is cut with a pair of scissors, it is convenient to match the air pump outlet.
3. Check that the air pipe joints under the mattress are all connected and kept inflated.
4. Because the winter is cool, we can put a thin layer of tweezers on the mattress to keep the patient warm and make the patient more comfortable.
5. Patients over 135KG cannot use this mattress.
6. Pay attention to the pressure control when inflating, and do not exceed the maximum pressure to prevent the airbag from breaking through the pressure.
7. Pay attention to keep the mattress clean and hygienic, often wash the surface with a neutral detergent, pay attention to acid and alkali.
8. Note that there should be no sharp objects on the mattress and the surface of the sheet to prevent the mattress from being pierced.
9. Be careful to keep it clean when using it. Store it in a dry and ventilated place when handling. Pay attention to moisture.
Pillow function
The cell of the heag positon won't be alternating , to provide the most comfortable for the patient
Alternating mode
The pump will be inflate and deflate for the cell with cylicity , to change the control position beteween the patient and the bed ,so that to promote the blood circulation to prevent the bedsore and recovery the bedsore, reduce the patient's pain and the nursing labor intensity.
Static mode
The system can be switched to a static mode with constant low pressure, to facilitate all kinds of nursing procedures including dressing changes.
Modular air cells , easy to change and clean.
Medical grade TPU material, environmentally friendly, waterproof, anti-bacterial,etc
Air ventilation hole design, bolwing by tiny holes, moisture control ,patient can feel more comfortable
High density sealed foam base provide more security, and can be vaccum save freight cost
Buckle fasten to bed more stable
Zipper all around cover easy maintenance and cleaning
Static mode
Factory info
Foshan hongfeng co.,Ltd(FOFO medical co., ltd) is located in Foshan city, Guangdong province. Our company specializes in the production of 5 inch bubble mattress, 5inch tubular mattress, mattress replacement with foam base, ICU 8inch cell in cell mattress,compressor nebulizer, pressure let air massager, suction machine and wheelchair with advanced technology. Our company covers an area of 10,000 square meters. "Intervention Protective Gloves" fill the domestic blank. Our company got ISO13485 medical instrument quality certification in 2001. Double Eagle brand products are sold in Beijing, Shanghai, Guangzhou, Jiangsu, and Shandong. Main products: one-off medical plastic instrument, mutilated machine, vertebrae tractor, medical bed style air cushion, medical oxygen bag, medical air cushion, and food tractor. Our medical instrument is sold all over the country. We sincerely welcome friends at home and abroad to make contribution to the development of Chinese medical instrument.