Model NO. FO3006/3008(manual) | |||
Treating time | 10-30mins/ always on | Power | 30W/65VA |
Pressure range | 30-250 mmHg | Mode | A mode |
Divice size | 24cm(L)*20cm(W)*11cm(H) | chamber | 4/6/8 chanbers |
cuffs: | |
---|---|
Color: | |
chambers: | |
Availability: | |
Quantity: | |
FO3006/3008 manual
FOFO
901910
Device Size | 24cm(L)*20cm(W)*11cm(H) |
Massage Mode | A Mode |
Pressure Range | 30-250mmHg |
Tremtment Time | 10-30mins/ always on |
Power Consumption | 30W/65VA |
Process advantages:
1. Sleeve fabric: imported from Taiwan
2. POM quick connector: detachable, easier storage, better than L-type interface
3. high-frequency technology: hardly damaged, exquisite details
4. Nylon SBS zipper: well-known brand, excellent quality
5. PVC hose: ribbed four-pronged tube with thick coating, non-breakable;with dust cap, maintain air tightness when transferred
6. Wrap-around strip: nylon material, encrypted and reinforced, water-resistant
Operating Instructions:
Connect the air hoses from the compression device to the corresponding sleeves or garments.
Put on the sleeves or garments on the affected limb(s) ensuring a snug fit but not too tight.
Turn on the compression device and select the appropriate pressure level as recommended by your healthcare provider.
The device will start inflating the sleeves or garments, gradually applying compression from distal to proximal areas.
Allow the therapy to continue for the prescribed duration, typically 30 minutes to 1 hour.
After the therapy session, the device will gradually deflate the sleeves or garments, releasing the compression.
Turn off the compression device and disconnect the air hoses from the sleeves or garments.
Clean the sleeves or garments as per the manufacturer's instructions and store them in a clean and dry place.
Device Size | 24cm(L)*20cm(W)*11cm(H) |
Massage Mode | A Mode |
Pressure Range | 30-250mmHg |
Tremtment Time | 10-30mins/ always on |
Power Consumption | 30W/65VA |
Process advantages:
1. Sleeve fabric: imported from Taiwan
2. POM quick connector: detachable, easier storage, better than L-type interface
3. high-frequency technology: hardly damaged, exquisite details
4. Nylon SBS zipper: well-known brand, excellent quality
5. PVC hose: ribbed four-pronged tube with thick coating, non-breakable;with dust cap, maintain air tightness when transferred
6. Wrap-around strip: nylon material, encrypted and reinforced, water-resistant
Operating Instructions:
Connect the air hoses from the compression device to the corresponding sleeves or garments.
Put on the sleeves or garments on the affected limb(s) ensuring a snug fit but not too tight.
Turn on the compression device and select the appropriate pressure level as recommended by your healthcare provider.
The device will start inflating the sleeves or garments, gradually applying compression from distal to proximal areas.
Allow the therapy to continue for the prescribed duration, typically 30 minutes to 1 hour.
After the therapy session, the device will gradually deflate the sleeves or garments, releasing the compression.
Turn off the compression device and disconnect the air hoses from the sleeves or garments.
Clean the sleeves or garments as per the manufacturer's instructions and store them in a clean and dry place.