FO9001-D / FO9100 Electric Suction Machine

What this machine is

The FO9001-D and the FO9100 are electric suction machines that draw secretions and fluids into a 1000 ml graduated collection jar. Both versions share the same housing, the same jar assembly and the same control layout, so a clinic or a distributor can work with one device and choose only the power source that suits the market.

The control panel carries an analogue vacuum gauge and a regulator knob. Rather than running at one fixed level, the machine is dialled to the vacuum the operator needs, anywhere from 0.02 MPa to 0.075 MPa, and the gauge shows the level that has been set. One unit therefore covers a low setting and a high setting without committing to a single fixed value.

The jar is transparent and graduated, with a red MAX line printed on it, so the fill level is read at a glance without opening the lid. The lid carries two ports for the connection tubing.

Built to be carried, not parked

At 1.8 kg with a moulded top handle, the unit moves between rooms, vehicles and treatment points by hand. On the DC version the built-in Li-ion battery keeps the machine running where there is no wall socket, and an optional car charger lets it work from a vehicle’s 12 V supply on the way to or between calls. The suction connection sits hidden inside the base, so the underside stays clean and flat when the machine is set down on a counter or a cart.

Key features

• Regulated negative pressure — adjustable from 0.02 MPa to 0.075 MPa, shown on an analogue gauge
• Oil free — no oil in the machine’s air path
• Low noise — noise level of 60 dBa or less
• 1000 ml jar — transparent, graduated, with a red MAX line
• Suction bottom hidden inside — the suction connection is housed within the base
• Rechargeable battery — the DC version runs from a built-in Li-ion battery
• Anti-rusting steel construction — as stated by the manufacturer, for a long service life
• 1.8 kg — light enough to be carried by the handle with one hand

Specifications at a glance

Parameter	Specification
Models	FO9001-D (AC motor) · FO9100 (DC motor with Li-ion battery)
Power supply	AC 100–240 V, 50 Hz / 60 Hz; DC 12 V 2 A
Input power	30 VA ± 25%
Max negative pressure value	≥ 0.075 MPa
Negative pressure adjustment range	from 0.02 MPa to 0.075 MPa
Free air flow rate	≥ 15 L/min
Jug volume	1000 ml
Noise level	≤ 60 dBa
Battery (for DC)	2600 mA
Unit weight	1.8 kg
Car charger	Optionally equipped

Choosing between the two versions

FO9001-D — AC motor. Powered from a wall socket across the 100–240 V, 50/60 Hz range, so a single version can be shipped to different mains standards.

FO9100 — DC motor with a Li-ion battery. The same machine with a built-in rechargeable battery, so it keeps working when mains power is not available, and it can be topped up from a vehicle with the optional car charger.

Both versions carry the same 1000 ml jar, the same gauge and the same regulator knob, which keeps spare parts, training and operating routine identical across a fleet.

Frequently asked questions

What is the difference between the FO9001-D and the FO9100? They are the same machine with different power sections. The FO9001-D uses an AC motor running from mains power; the FO9100 uses a DC motor with a built-in Li-ion battery and can be supplied with an optional car charger.

How much suction can it produce, and can the level be adjusted? The maximum negative pressure value is 0.075 MPa or more, and the working level is adjustable from 0.02 MPa to 0.075 MPa. The level is set with the regulator knob and read on the analogue gauge.

What is the noise level? The stated noise level is 60 dBa or less.

What are the power requirements? AC 100–240 V, 50 Hz / 60 Hz, or DC 12 V 2 A, with an input power of 30 VA ± 25%.

How much does the machine weigh? The unit weight is 1.8 kg, and the top handle is moulded into the housing.

How long does the battery run? Running time depends on the vacuum level you select and the duty cycle you work to. Tell us your requirement and we will confirm the figures for the configuration you need.

Is this machine suitable for a specific patient group? The unit is a suction device and does not itself define which patients it may be used on. Suitability should be decided by your own clinical protocol and the local regulatory requirements of your market.

What is included, and can it be customised? Each machine is supplied with its graduated collection jar assembly; the car charger is optional. Accessory configuration, packaging and branding can be discussed with our team for your market.

How do I place an order or get a quotation? Send your destination market, the required quantity and the power configuration you need through the Contact Supplier button on this page, and our team will reply with the quotation, packing details and shipping plan.